Справочник Пользователя для Sun Microsystems A3500FC
Chapter 2
FC-AL Host Connections
2-3
■
Once you finish cabling the devices and powering on, reboot the system by
typing
typing
boot -r
at the
ok
prompt before beginning any SCSI bus activity.
■
Perform a system check to make sure that SCSI and fiber-optic cable connections
are secure. Check for fault LEDs on the hardware or error messages in the RAID
Manager GUI.
are secure. Check for fault LEDs on the hardware or error messages in the RAID
Manager GUI.
Note –
Refer to your server and rack documentation for instructions on grounding
the StorEdge A3500FC expansion cabinet.
2.2
Supported FC-AL Host Configurations
The illustrations in this section show the FC-AL cable connections for the following
configurations:
configurations:
■
■
■
■
■
■