Справочник Пользователя для Intel SG-81
3-18 Chapter
3
ECP Mode Use DMA (3)
When the onboard parallel port is set to ECP mode, the parallel port can use DMA3 or
DMA1.
DMA1.
Press <Esc> to return to the Integrated Peripherals screen.
Onboard 1394 Device (Enabled)
Enables and disables the onboard IEEE 1394 controller.
Init Display First (PCI Slot)
Use this item to specify whether your graphics adapter is installed in one of the PCI
slots or is integrated on the motherboard.
slots or is integrated on the motherboard.
3.2.5.
Power Management Setup
This option lets you control system power management. The system has various
power-saving modes including powering down the hard disk, turning off the video,
suspending to RAM, and software power down that allows the system to be
automatically resumed by certain events.
power-saving modes including powering down the hard disk, turning off the video,
suspending to RAM, and software power down that allows the system to be
automatically resumed by certain events.
ACPI Suspend Type (S3(STR))
Use this item to define how your system suspends. In the default, S1(POS), the
suspend mode is equivalent to a software power down. If you select S3 (STR), the
suspend mode is a suspend to RAM, i.e., the system shuts down with the exception of
a refresh current to the system memory.
suspend mode is equivalent to a software power down. If you select S3 (STR), the
suspend mode is a suspend to RAM, i.e., the system shuts down with the exception of
a refresh current to the system memory.
SG-80 Series