Справочник Пользователя для Intel SE7221BA1-E

The Windows* operating systems do not include all of the drivers for the Intel chipsets, onboard 
NICs, and other components. See “

drivers and chipset files. 

Check the following: 

 Make sure the drive is not disabled in BIOS Setup. 
 Make sure the drive is connected correctly and that is plugged into the power supply.  
 Make sure the drive is compatible. See “

tested drives. 

 Make sure you have not exceeded the power budget for the server. See “

” for a link to software to check your power budget. 

 If using SCSI drives, verify that each SCSI ID number is uniqe on the SCSI bus.  See your 

drive documentation for details on setting the SCSI ID for your drives. 

 If using IDE drives, verify that the master/slave settings are set correctly.  See your drive 

documentation for details on setting the master/slave settings. 

 If using a RAID configuration with SCSI or SATA drives, make sure the RAID card is installed 

correctly. 

Check the following: 

 Make sure the BIOS is configured to allow the CD-ROM to be the first bootable device. 

 

The Intel® Entry Server Board SE7221BA1-E includes LEDs that can aid in troubleshooting your 
system. A table of these LEDs with a description of their use is listed below.   

IDE activity 

Front panel 

Front panel  

Red 

Blinking = Activity. No action 
required. 

5v Standby 

Identify 5v standby 
power on state 

Back right board 

Green 

On = 5v standby power on 

Power LED 

Identify the power state 
of the system 

Front Panel 

Green 

 

Off = Power is off (off or 
S5) 

 

On = Power on or S0) 

 

32 

                Intel® Entry Server Board SE7221BA1-E User Guide