Справочник Пользователя для Intel PMG41-D2

 
 
 
                                                                                                                                                                                                                                                                                                                                                             

 
 
 

 

9 

SURROUND1     

This Connector is 3 phones Jack for LINE-OUT, LINE-IN, and MIC 

    Audio output to speaker 

Line-in: (BLUE)   

    Audio input to sound chip 

MIC: (PINK)   

        Microphone Connector 

 
       

 
 
 
 
  (7) Floppy drive Connector (34-pin block): FLOPPY 

This connector supports the provided floppy drive ribbon cable.  After connecting the 
single plug end to motherboard, connect the two plugs at other end to the floppy drives. 

 
 
 
 
 
 
 
 
 
 
(8)    Primary IDE Connector (40-pin block): IDE 
 

This connector connects to the next set of Master and Slave hard disks.    Follow the 
same procedure described for the primary IDE connector.    You may also configure two 
hard disks to be both Masters using one ribbon cable on the primary IDE connector and 
another ribbon cable on the secondary IDE connector.   

z  Two hard disks can be connected to each connector.    The first HDD is referred to 

as the “Master” and the second HDD is referred to as the “Slave”. 

z  For performance issues, we strongly suggest you don’t install a CD-ROM or 

DVD-ROM drive on the same IDE channel as a hard disk.  Otherwise, the system 
performance on this channel may drop.