Справочник Пользователя для Intel US15W

 

User’s Manual 

 15 

    Document Number: 320264 

PCI Express* 
Mini Card 
connector 

2 connectors. 
Mini Card connector A, 
functionality is enabled by 
default.  

NOTE:  PCI Express* signals are 

left unconnected on Mini 
Card B. 

NOTE:  For more information, refer to 

Section 2.5.4, PCI Express* 
Slots. 

LPC 

One LPC slot 

No DMA support 

TPM 

Through TPM header (TPM 1.2) 

 

Microcontroller 

Renesas Technology* H8S/2117 

Includes integrated SPI as an option 

FWH 

FWH LPC based with socket 

40-pin TSSOP socket 

SIO 

Uses TPM header 

Backup only; provides floppy, COM, 
Parallel, and PS2 

SMC/KBC 

Scan matrix headers and PS/2 in 
back panel keyboard connector 

ACPI compliant through H8S/2117 

RTC 

Battery-backed real time clock 

 

Port 80 Decode 

Supported down on motherboard 
with four seven-segment displays 

Has an option for cable-up to front panel 
of chassis 

Desktop Mode 

ATX Power Supply 

Power Supply 

Virtual Battery 

SW8A1 switch 

ITP Support 

Extended Debug Port (XDP)  

J1E3 XDP connector 

Power 
Management 
Form Factor 

ACPI Compliant 

S0 – Power On 
S3 – Suspend to RAM 
S4 – Suspend to Disk 
S5 – Soft Off 

The reference board supports the Intel® Atom™ processor Z530 with 512-KB cache in 
a 441-pin, FCBGA package. No heatsink is required by this processor during room 
temperature ambient operation. 

The reference board uses an onboard Intel® MVP6 single-phase regulator for the 
processor core supply. The I/O voltage is 1.05 V. See 

Section 4.5

 for VID jumper 

location and 

Appendix B

 for the VID code table.