Справочник Пользователя для Intel MI910

 

 
The Mi910 board supports two DDR2 memory socket for a maximum 
total memory of 4GB in DDR2 memory type.  

To install the DDR2 modules, locate the memory slot on the board and 
perform the following steps: 

1. Hold the DDR2 module so that the key of the DDR2 module aligned 

with that on the memory slot. 

2. Gently push the DDR2 module in an upright position until the clips of 

the slot close to hold the DDR2 module in place when the DDR2 
module touches the bottom of the slot. 

3. To remove the DDR2 module, press the clips with both hands.