Справочник Пользователя для Intel D815EEA2

32  

 

Using Figure 9 as a reference, follow these steps to install a GPA card: 

1.  Position the GPA card over the AGP universal connector so that the arrow (A) on the GPA 

card points toward the back panel I/O of the computer.  Hook the notch (B) on the back of the 
GPA card over the back of the AGP universal connector’s retention mechanism (RM). 

2.  Push the card in direction (C) while lowering (but not inserting) the card in direction (D).  

Note: The GPA card will tend to slip forward out of position unless pressure is maintained in 
direction (C) as the card is lowered. 

3.  Before inserting the GPA card, verify that both ends of the card’s edge plug align squarely 

over the AGP universal connector (E). 

4.  Press down on both ends of the card in direction (F) until it is inserted completely in the AGP 

universal connector and the RM’s retention notch snaps into place. 

To remove the GPA card, push the RM’s release lever in direction (G) to release the card.  Lift the 
card out of the AGP universal connector tilting in direction (C) and unhook it from the back of the 
RM (B). 

OM10410

A

F

G

D

B

F

C

E