Справочник Пользователя для Intel D915GUX
Installing and Replacing Desktop Board Components
45
Installing a Front Panel Audio Solution
Figure 22, E on page 44 shows the location of the yellow front panel audio header. Table 9 shows
the pin assignments for the front panel audio header.
the pin assignments for the front panel audio header.
Table 9.
Front Panel Audio Header Signal Names
Pin Signal
Name
Pin Signal
Name
1
Port1L
2
GND
3 Port1R
4 Presence#
5 Port2R
6 Sense1
Ret
7
Sense Send
8
Key (no pin)
9 Port2L
10
Sense2
Ret
To install the cable that connects the front panel audio solution to the front panel audio header,
follow these steps:
follow these steps:
1. Observe the precautions in "Before You Begin" on page 27.
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover.
4. Locate the yellow front panel audio header. Remove the two jumpers from the header to
4. Locate the yellow front panel audio header. Remove the two jumpers from the header to
disable the back panel audio connectors.
5. Install a correctly keyed and shielded front panel audio cable.
6. Connect the audio cable to the front panel audio solution.
7. Replace the cover.
6. Connect the audio cable to the front panel audio solution.
7. Replace the cover.
To restore back panel audio, follow these steps:
1. Observe the precautions in "Before You Begin" on page 27.
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover.
4. Remove the front panel audio cable.
5. Install a jumper on pins 5-6 (rear R channel).
6. Install a jumper on pins 9-10 (rear L channel).
7. Replace the cover.
4. Remove the front panel audio cable.
5. Install a jumper on pins 5-6 (rear R channel).
6. Install a jumper on pins 9-10 (rear L channel).
7. Replace the cover.