Справочник Пользователя для Intel Motherboard

44

This submenu is for configuring the boot sequence for removable devices.

• 

Legacy Floppy Drives

Specifies the boot sequence for the removable devices attached to the
computer.  To specify boot sequence:

1.  Select the boot device with <

↑

> or <

↓

>.

2.  Press <+> to move the device up the list or <-> to move the device down

the list.

The operating system assigns a drive letter to each device in the order listed.
Changing the order of the devices changes the drive lettering.

This menu is for exiting the Setup program, saving changes, and loading and saving defaults.

Exit Saving Changes

Exits and saves the changes in CMOS RAM.

Exit Discarding Changes

Exits without saving any changes made in Setup.

Load Setup Defaults

Loads the factory default values for all the Setup options.

Load Custom Defaults

Loads the custom defaults for Setup options.

Save Custom Defaults

Saves the current values as custom defaults.  Normally, the BIOS reads the
Setup values from flash memory.  If this memory is corrupted, the BIOS reads
the custom defaults.  If no custom defaults are set, the BIOS reads the factory
defaults.

Discard Changes

Discards changes without exiting Setup.  The option values present when the
computer was turned on are used.