Справочник Пользователя для Intel 8I845PE-RZ-C
- 11 -
Hardware Installation Process
English
Step 4: Install I/O Peripherals Cables
Step 4-1: I/O Back Panel Introduction
u
PS/2 Keyboard and PS/2 Mouse connector
This connector supports standard PS/2 keyboard and PS/2 m ouse.
v
Parallel port (LPT)
Device like printer can be connected to Parallel port.
w/x Serial port (COMA/COMB)
Mouse and modem etc. can be connected to Serial port.
y
Game/MIDI port
This connector supports joystick, M IDI keyboard and other relate audio devices.
z
Line Out jack
Connect the stereo speakers or earphone to this connector.
{
Line In jack
Devices like CD-ROM , walkm an etc. can be connect to Line In jack.
Step 3: Install AGP Card
1. Read the relateAGP card's instruction document before install the AGP card into the computer.
2. If your AGP card has "AGP 4X(1.5V) notch" (show below), please make sure your AGP card is AGP
2. If your AGP card has "AGP 4X(1.5V) notch" (show below), please make sure your AGP card is AGP
4X(1.5V).
"*" For 8I845PE-RZ only.
3. Please carefully pull out the small white- drawable bar at the end of the AGP slot when you try to
install/ Uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firm ly
down on the slot .M ake sure your AGP card is locked by the sm all white- drawable bar.
down on the slot .M ake sure your AGP card is locked by the sm all white- drawable bar.
u
v
w
x
y
z
{
} *
~
|