Справочник Пользователя для Intel 8I845PE-RZ-C
- 31 -
BIOS Setup
English
Top Performance
If you wish to m aximize the perform ance of your system , set "Top Performance" as "Enabled".
Disabled Disable this function. (Default Value)
Enabled Enable Top Performance function.
Enabled Enable Top Performance function.
"Top Performance" will increase H/W working speed. Different system configuration (both H/W
com ponent and OS) will effect the result. For exam ple, the sam e H/W configuration might not run
properly with Windows XP, but works sm oothly with Windows NT. Therefore, if your system is not
perform enough, the reliability or stability problem will appear sometimes, and we will recomm end you
disabling the option to avoid the problem as mentioned above.
properly with Windows XP, but works sm oothly with Windows NT. Therefore, if your system is not
perform enough, the reliability or stability problem will appear sometimes, and we will recomm end you
disabling the option to avoid the problem as mentioned above.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
}
Standard CMOS Features
}
Advanced BIOS Features
}
Integrated Peripherals
}
Power Management Setup
}
PnP/PCI Configurations
}
PC Health Status
}
Frequency/Voltage Control
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Set User Password
Save & Exit Setup
Exit Without Saving
ESC: Quit
higf: Select Item
F8: Q-Flash
F10: Save & Exit Setup
Top Performance
Disabled.........................[
n]
Enabled..........................[ ]
hi: Move
ENTER: Accept
ESC: Abort
Host/DRAM Clock Ratio
(Warning: wrong frequency may m ake system can boot, clear CMOS to overcom e wrong
frequency issue)
for FSB(Front Side Bus) frequency=400MHz,
frequency issue)
for FSB(Front Side Bus) frequency=400MHz,
2.66
Memory Frequency = Host clock X 2.66.
Auto Set M em ory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=533MHz,
2.0
Memory Frequency = Host clock X 2.0.
2.5
Memory Frequency = Host clock X 2.5.
Auto Set M em ory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on CPU Host Frequency(Mhz).
PCI/AGP Frequency(Mhz)
The values depend on PCI/AGP Divider.