Справочник Пользователя для Intel DQ35MP
Installing and Replacing Desktop Board Components
35
Installing and Removing a Processor
Instructions on how to install the processor to the Desktop Board are given below.
Installing a Processor
CAUTION
Before installing or removing the processor, make sure the AC power has been
removed by unplugging the power cord from the computer; the standby power
indicator should not be lit (see Figure 4 on page 28). Failure to do so could damage
the processor and the board.
removed by unplugging the power cord from the computer; the standby power
indicator should not be lit (see Figure 4 on page 28). Failure to do so could damage
the processor and the board.
To install a processor, follow these instructions:
1. Observe the precautions in "Before You Begin" on page 31.
2. Open the socket lever by pushing the lever down and away from the socket
1. Observe the precautions in "Before You Begin" on page 31.
2. Open the socket lever by pushing the lever down and away from the socket
(Figure 7, A and B).
Figure 7. Lift the Socket Lever