Справочник Пользователя для Intel 915GME

Mobile Intel

®

 915GME Express Chipset

April 2007

Development Kit User’s Manual

Order Number: 317230-001US

19

Connect a PS/2-style or USB mouse and keyboard (see 

connector locations).

J1A1 (on the baseboard) is a stacked PS/2 connector. The bottom connector is for the 

keyboard and the top is for the mouse.

8. Connect an Ethernet cable (optional).
9. Connect the monitor through the VGA connector.

10. Connect the power supply.

Connect an appropriate power supply to the evaluation board. Make sure the power 

supply is not plugged into an electrical outlet (turned off). After connecting the 

power supply board connectors, plug the power supply cord into an electrical 

outlet.

11. Power up the board.

Reset and Power are implemented on the evaluation board through buttons located 

on SW1C1and SW1C2, respectively. Refer to 

 for switch 

locations.
Turn on the power to the monitor and evaluation board. Ensure that the fansink on 

the processor is operating.

12. Install operating system and necessary drivers

Depending on the operating system chosen, all necessary drivers for components 

included in this development kit can be found on the enclosed CD. Please see 

 for information on obtaining updated drivers.

AMI* BIOS is pre-loaded on the evaluation board. The default BIOS settings may need 

to be modified to enable/disable various features of the evaluation board. The setup 

program can be used to modify BIOS settings and can be accessed during the Power On 

Self Test (POST). Setup options are configured through a menu-driven user interface. 

For AMI BIOS POST codes, visit:

BIOS updates periodically may be posted to Intel’s Developers’ Web site at: