Справочник Пользователя для Intel 915GME
Mobile Intel
®
915GME Express Chipset —Hardware Reference
Mobile Intel
®
915GME Express Chipset
Development Kit User’s Manual
April 2007
42
Order Number: 317230-001US
3. Program the H8 via the serial port.
4. Disconnect the power supply from the system.
5. With the board powered off, move the five jumpers listed in
4. Disconnect the power supply from the system.
5. With the board powered off, move the five jumpers listed in
back to the
default stuffing option.
4.6.2
Expansion Slots and Sockets
4.6.2.1
478 Pin Grid Array (Micro-FCPGA) Socket
The pin locking mechanism on the CPU socket is released by rotating the screw on the
socket 180 degrees counter-clockwise. CPU pins are keyed so as to only allow insertion
in one orientation. DO NOT FORCE CPU into socket. Once the CPU is properly seated
Table 11.
H8 Programming Jumpers
#
Jumper
Reference
Designator
Default Stuffing Option
Programming Stuffing
Option
3
1Hz Clock
J9H1
Out - normal operation -
clock enabled
IN - clock disabled - enable H8
programming
4
H8 Programming
J9J3
OUT - normal operation
IN - enable external H8
programming
8
In-circuit H8
Programming
J7J1
1-2 normal operation (SIO)
2-3 connect TxD to H8 for
programming
15
Tx Select
J7A3
1-2 Normal Operation
2-3 connect TxD to H8 for
programming
16
Rx Select
J7A2
1-2 normal operation (SIO)
2-3 connect RxD to H8 for
programming
Table 12.
Expansion Slots and Sockets
Reference
Designator
Slot/Socket Description
Detail
U2E1
478 Pin Grid Array (Micro-FCPGA) Processor Socket
J5N1
DDR2 - Channel A - SODIMM slot
J5P1
DDR2 - Channel B - SODIMM slot
J5F1
LVDS Graphics Interface
J6C1
PCI Express (x16)
J6C1
ADD2-R Slot
J7C2
PCI Express (x1) Slot 1
J8C1
PCI Express (x1) Slot 2
J8D1
PCI Express (x1) Slot 3
J8B1
PCI 2.3 Slot 1
J9B3
PCI 2.3 Slot 2
J7J2
IDE Interface Connector
J8J3
Mobile SATA Hard Drive Interface Connector
J7H1
Desk Top SATA Hard Drive Interface Connector
J6H3
SATA Desk Top Power Connector
U8G1
Intel Firmware Hub Socket
BT5H1
Battery