Справочник Пользователя для Intel ADE-6050

   

 

 

 

 

 

 

 

 

 

 

 

 

24 / 48 

 

The figures display the notch marks and what they should look like on your SO-DIMM 

memory module. 

 

SO-DIMM has 200-pins and two notches, that will match with the onboard SO-DIMM socket.  

Memory modules are installed by placing the chip firmly into the socket at a parallel angle 

and pressing straight down until it fits tightly into the SO-DIMM socket. 

 
 
 
 
 
 
 
 
 
 

SO-DIMM Memory and 200-pins Socket 

 
 
 
 
 
 
 

Memory Installation 

 

NOTE: For maintaining system stability, do not change any of memory parameters in BIOS 

setup to upgrade your system performance without acquiring technical information. 

 

To install the board into standard chassis or proprietary environment, you need to perform 

the following steps: 

1.  Check all jumpers setting on proper position 

2.  Install and configure CPU and memory module on right position 

3.  Place the board into the dedicated position in your system 

4.  Attach cables to existing peripheral devices and secure it