Справочник Пользователя для Intel BLKDX79TO

18 

The onboard audio subsystem consists of the following components: 
•  Intel X79 Express Chipset 
•  RealTek ALC892 codec 
The subsystem has the following headers and connectors: 
•  Three back panel analog audio connectors 
•  High Definition (HD) Audio front panel header that provides mic in and line out 

signals for front panel audio connectors 

The audio subsystem supports the following features: 
•  Advanced jack sense for the back panel analog audio jacks that enables the audio 

codec to recognize the device that is connected to an audio port.  The back panel 
audio jacks are capable of retasking according to the user’s definition, or can be 
automatically switched depending on the recognized device type. 

•  A signal-to-noise (S/N) ratio of 95 dB.  
•  Independent multi-streaming 6-channel (5.1) audio (using the back panel audio 

connectors) and 2-channel audio (using the Intel High Definition Audio front panel 
header).  

Go to the following pages for more information about: 
•  The location of the onboard audio headers, Figure 20 on page 47 
•  The signal names for the Intel High Definition Audio front panel header, page 48 
•  The back panel audio connectors, Figure 21 on page 51  

The board’s Gigabit (10/100/1000 Mb/s) LAN subsystem includes: 
•  Intel X79 Express Chipset 
•  Intel 82579LM Gigabit Ethernet LAN Controller 
•  An RJ-45 LAN connector with integrated status LEDs 
The subsystem features: 
•  CSMA/CD protocol engine 
•  LAN connect interface between the Intel PCH and the LAN controllers 
•  PCI bus power management 
•  ACPI technology support 
•  LAN wake capabilities  
Go to the following link for information about LAN software and drivers:  

http://www.intel.com/products/motherboard/index.htm