Справочник Пользователя для Intel 9EJL4
Chapter 2
1. Disconnect the system power supply from the power source.
2. Set the jumper cap at location [2-3] for <5 seconds>, and then set it back to the
default position.
3. Connect the system's power and then start the system.
4. Enter BIOS's CMOS Setup Utility and choose Load Setup Defaults. Type [Y] and
then press [Enter] to continue.
5. Set the system configuration in the Standard CMOS Setup menu.
JP6 (Enable/Disable USB 0/1, Device Wake-Up Jumper)
Pin
Definition
1-2 Disable
(default)
2-3 Enable
JP6
USB 0/1
An USB keyboard hot key or an USB mouse-click can activate this board. To use
this function, select a hot key of your choice at the USB Resume from S3 option
under Wake Up Events in the BIOS's Power On Management screen. You must also
set this jumper's cap to pins 2-3 to use this function.
11