Справочник Пользователя для Intel 9EJL4

Chapter 3     

3.  Typematic Delay (Msec)   

The typematic delay sets how long after you press a key that a character begins 

repeating. 

The Supervisor and/or User Password functions shown in Figure 3-1 must be set to 

take advantage of this function. See Section 3.11 for password setting information. 

When the Security Option is set to System, a password must be entered to boot the 

system or enter the BIOS setup program. When the Security Option is set to Setup, a 

password is required to enter the BIOS setup program. 

APIC Mode: 

In order to comply with PC2001 standard, the system is designed to run in APIC 

(Advanced Programmable Interrupt Controller) mode. Enabling APIC mode 

will increase the available IRQ resources for the system. Available options are 

[Enabled] and [Disabled]. 

This item allows you to select which MPS (Multi-Processor Specification) version 

to be used for the operating system. You need to select the MPS version which is 

supported by your operating system. To find out which version to use, consult the 

vendor of your operating system. Available options are [1.4] and [1.1]. 

If your system's DRAM is larger than 64MB and you are running OS/2, select OS/2 

as the item value. Otherwise, set the item value to Non-OS/2 for all other operating 

systems. 

This setup allows photo that is EPA. Logo. 

Enabling this function can show POST error code on the screen before proceeding to 

system’s operating system. 

 

 

19