Справочник Пользователя для Intel 9EJL4

Chapter 3

selected Blank. This function serves as both screen and a power saver.

3. DPMS Supported - Select this option if your video card supports the Display

Power Management Signaling (DPMS) standard (i.e., you have a monitor that

supports Green features). Use software supplied by your video subsystem to set

video power management options.

Video off In Suspend:

If it is set to [Yes] the monitor enters power saving mode. The Power Management

function must be enabled to use this function.

Suspend Type:

Available options: [Stop Grant] and [Pwr-On Suspend].

Modem Use IRQ:

If your computer has a modem use this function to tell BIOS the IRQ value occupied

by the modem card. When the system is in Green mode, the modem requires an IRQ

assignment to activate the system and perform tasks. This assignment is compliant

with the APM 1.2 compliant operating systems.

Suspend Mode:

The Power Management function is set as [Enabled] to activate this function. If the

system runs in Standby mode and the Suspend timer expires, all devices regulated

by power management will shut down and the CPU speed will be 0 MHz.

HDD Power Down:

It shuts down any IDE hard disk drives in the system after an idle period. This

feature does not affect SCSI hard drives.

Soft-Off by PWR-BTTN:

When set to Delay 4 Sec., this function allows the power button to put the system in

Suspend, a power saving mode. When set to Instant-Off the Soft-Off by PWR-BTN

function is disabled and the computer turns completely off when the power button is

pressed.

Primary/Secondary IDE 0/1:

Available options: [Disabled] and [Enabled].

FDD, COM, LPT Port:

Available options: [Disabled] and [Enabled].

PCI PIRQ[A-D]#:

Available options: [Disabled] and [Enabled].