Справочник Пользователя для Intel 9EJL4

Chapter 2 

If your motherboard has already been installed in your computer you may still need 

to refer to this chapter if you plan to upgrade your system's hardware. 

 

The Intel® Socket 478, designed for the Pentium 4 processor, has been incorporated 

as a standard motherboard specification. This motherboard will support Intel® 

Pentium 4 CPUs with its embedded Hyper-Threading technology. To insert your 

CPU into Socket 478 please follow the steps below: 

1.  Locate the 478-pin CPU socket on the motherboard. 

2.  Unlock the socket by pressing the lever sideways, and 

then open it up to a 90-degree angle. 

3.  Locate a Gold Mark on the top surface of the CPU, 

which is close to one of the CPU corners. The same 

corner will also be cut off, leaving a noticeable notch 

in the CPU's corner. These markings indicate Pin 1 on 

the CPU. 

4. Gently insert the CPU with Gold Mark/Pin 1 at the 

same corner of Socket 478, which is located close to 

the end of the lever. Allow the weight of the CPU to 

push itself into place. Do not apply extra pressure as 

doing so may result in damaging your CPU. 

5. When the CPU is correctly inserted, close the lever 

with your finger on to of the CPU to make sure the 

CPU is properly embedded into the socket. 

6.  Insert an appropriate heat sink and fan for proper Heat 

dispatch. 

 

 

 

4