Справочник Пользователя для Intel AW8D
3.4 Advanced Chipset Features
DRAM Timing Selectable
This item sets the optimal timings for the following four items, depending on the memory
module you are using. The default setting “By SPD” configures these four items by reading the
contents in the SPD (Serial Presence Detect) device. The EEPROM on the memory module
stores critical parameter information about the module, such as memory type, size, speed,
voltage interface, and module banks.
module you are using. The default setting “By SPD” configures these four items by reading the
contents in the SPD (Serial Presence Detect) device. The EEPROM on the memory module
stores critical parameter information about the module, such as memory type, size, speed,
voltage interface, and module banks.
-
CAS Latency Time (tCL)
This item controls the latency between the DRAM read command and the time that the data
becomes actually available.
becomes actually available.
-
RAS# to CAS# Delay (tRCD)
This item controls the latency between the DRAM active command and the read/write
command.
command.
-
RAS# Precharge (tRP)
This item controls the idle clocks after issuing a precharge command to the DRAM.
-
Precharge Delay (tRAS)
This item controls the number of DRAM clocks used for the DRAM parameters.
Memory Hole At 15M-16M
When set to [Enabled], the memory address space at 15M-16M will be reserved for ISA
expansion cards that specifically requires this setting. This makes the memory from 15MB and
up unavailable to the system. Leave this item to its default setting.
expansion cards that specifically requires this setting. This makes the memory from 15MB and
up unavailable to the system. Leave this item to its default setting.
3-18
AW8D