Справочник Пользователя для Intel GME965
Hardware Reference
316704-001 / Development Kit User’s Manual
41
Figure 4. D-Connector to Component Video Cable
Figure 5. D-Connector to Composite Video Cable
Figure 6. D-Connector to S-Video Cable
4.3
Configuration Settings
Note: Do not move jumpers with the power on. Always turn off the power and unplug the
power cord from the computer before changing jumper settings. Failure to do so may
cause damage to the development board.
cause damage to the development board.
Figure 7
shows the location of the configuration jumpers and switches.
Table 15
summarizes the jumpers and switches and gives their default and optional
settings.