Справочник Пользователя для Intel GA-8I915PL-G

GA-8I915PL-G Motherboard

- 36 -

Enabled

Enable onboard 1st channel IDE port. (Default value)

Disabled

Disable onboard 1st channel IDE port.

Disabled

Disable this function.

Auto

BIOS will auto detect. (Default value)

 

Combined

Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on
the motherboard; 2 for SATA and the other for PATA IDE.

Enhanced

Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6
HDDs to use.

Non-Combined

Set On-Chip SATA mode to Non-Combined, SATA will be simulated to
PATA mode.

Ch.1 Master/Slave

Set PATA IDE to Ch. 1 Master/Slave.

Ch.0 Master/Slave

Set PATA IDE to Ch. 0 Master/Slave. (Default value)

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

       If PATA IDE were set to Ch. 1 Master/Slave,this function will auto set to Ch. 0 Master/Slave.

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

If PATA IDE were set to Ch. 0 Master/Slave,this function will auto set to Ch. 1 Master/Slave.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Integrated Peripherals

On-Chip Primary PCI IDE

[Enabled]

On-Chip SATA Mode

[Auto]

x PATA IDE Set to

Ch.0 Master/Slave

SATA Port 0/2 Set to

Ch.2 Master/Slave

SATA Port 1/3 Set to

Ch.3 Master/Slave

USB Controller

[Enabled]

USB 2.0 Controller

[Enabled]

USB Keyboard Support

[Disabled]

USB Mouse Support

[Disabled]

AC97 Audio

[Auto]

Onboard H/W LAN

[Enabled]

Onboard LAN Boot ROM

[Disabled]

Onboard Serial Port 1

[3F8/IRQ4]

Onboard Serial Port 2

[2F8/IRQ3]

UART Mode Select

[Normal]

x UR2 Duplex Mode

Half

Onboard Parallel Port

[378/IRQ7]

Parallel Port Mode

[SPP]

x ECP Mode Use DMA

3

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help
Menu Level`