Справочник Пользователя для Promise Technology M310p
VTrak M310p, M210p Product Manual
100
If you created a fault-tolerant logical drive (any RAID level except RAID 0), the
Operational Status of new logical drive will display Synchronizing for several
minutes after creation. You can use the logical drive during this period but read/
write performance could be slower than normal. See “Logical Drive
Synchronization” on page 109.
Operational Status of new logical drive will display Synchronizing for several
minutes after creation. You can use the logical drive during this period but read/
write performance could be slower than normal. See “Logical Drive
Synchronization” on page 109.
Delete a Logical Drive
The Disk Array–Delete LD tab enables you to delete a logical drive under this
disk array.
disk array.
To delete a logical drive:
1.
Click the Subsystem
icon in Tree View.
2.
Click on the Disk Arrays
icon.
3.
Click on the Disk Array
icon.
4.
Click on the Delete LD tab in Management View.
5.
Check the box to the left of the logical drive you want to delete.
6.
Click the Submit button.
In the confirmation box, type the word confirm in the field provided.
7.
Click the OK button.
The selected logical disappears from the Logical Drive List on the Information
tab.
tab.
Disk Array Migration
For VTrak, the term “Disk Array Migration” means either or both:
•
Change the RAID Level
•
Expand the storage capacity
For a list of Migration options and other important information, see “RAID Level
Migration” on page 195.
Migration” on page 195.
Caution
All data on the logical drive will be lost. Back up any valuable data
before deleting the logical drive.
before deleting the logical drive.