Справочник Пользователя для Promise Technology M310p
Chapter 5: Management with the CLU
121
Drive Status Indicators
There are two LEDs on each Drive Carrier. They report the presence of power
and a disk drive, and the current condition of the drive.
and a disk drive, and the current condition of the drive.
Figure 2. VTrak M310p/M210p disk carrier LEDs
The VTrak spins up the disk drives sequentially in order to equalize power draw
during start-up. After a few moments the Power/Activity and Disk Status LEDs
should display green.
during start-up. After a few moments the Power/Activity and Disk Status LEDs
should display green.
See “Critical & Offline Disk Arrays” on page 228 for a discussion of rebuilding and
failed disk drives.
failed disk drives.
Audible Alarm
VTrak’s alarm has five different patterns, as shown below.
LEDs
State
Dark
Steady
Green
Flashing
Green
Amber
Red
Power/
Activity
No Drive
Drive
Present
Activity
Status
No Power/
No Drive
Drive OK
Drive
Rebuilding
Drive
Error
Disk Status
Power/Activity
.25s
.25s
.25s
.25s
.25s
.25s
.25s
.25s
.25s
.25s
.25s
.25s
.5s
.25s
.5s
.75s
.25s
.75s
.25s
.75s
1s
1.25s
2.5s
3s
1x
2x
1
2
3
4
5
6s
s
8