Справочник Пользователя для Lucent Technologies R5SI

Скачать
Страница из 2643
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si  
555-230-123  
Issue 1
April 1997
Maintenance Object Repair Procedures 
Page 10-1527
UDS1-BD (UDS1 Interface Circuit Pack) 
10
UDS1-BD (UDS1 Interface Circuit 
Pack)
The UDS1 Interface circuit pack provides an interface to the DS1 facility. UDS1 
Interface circuit packs include the TN464B circuit pack and the TN464C circuit 
pack.
The TN464B circuit pack is designed to support 32 DS0 channels on a 2.048 
Mbps DS1 link, and the TN464C (or greater vintage) circuit pack is designed to 
support either 24 DS0 channels on a 1.544 Mbps DS1 link or 32 DS0 channels on 
a 2.048 Mbps DS1 link. The TN464C (or greater vintage) circuit pack is optioned 
via a removable strap on the circuit pack. The 2 strap positions are labeled 
"24CHNL" or "32CHNL."
The DS0 channels can be administered either as trunks to other switches, lines to 
off-premises stations, ports to line-side PRI terminating devices, or as ports to 
other line-side non-PRI terminating devices.
NOTE:
DS0 channels on the TN464B circuit pack can be administered only as 
trunks to other switches.
UDS1 Interface Circuit Pack Maintenance documentation provides a strategy for 
maintaining the UDS1 Interface circuit pack. The maintenance strategy deals 
with logging the in-line errors reported by the UDS1 Interface circuit pack, 
running tests for error diagnosis and recovery, and raising or clearing 
maintenance alarms.
The TN464B and TN464C circuit packs support Tie trunks, CO trunks, DID 
trunks, OPS lines, narrowband access endpoint ports, the ISDN-PRI signaling 
channel (D-channel), and ISDN-PRI trunks (B-channels). The TN464C circuit 
pack can also support wideband access endpoint ports and PRI endpoint ports 
(B-channels).
The signaling (that is, the call setup) for the Tie trunks, CO trunks, DID trunks and 
OPS lines is done on the circuit pack by the UDS1 firmware. Signaling for the 
B-channels (ISDN-PRI trunks and PRI endpoint ports) is routed over the 
D-channel. ISDN-PRI Trunk and PRI endpoint port signaling (Q.921, Q.931), 
however, is not provided by the UDS1 Interface circuit pack. For the MIPS 
version of D92, the system software generates and/or receives the actual 
MO Name As 
It Appears in 
Alarm Log
Alarm 
Level
Initial System 
Technician 
Command to Run
Full Name of MO
UDS1-BD
MAJOR
test board PCSSpp sh
UDS1 Interface Circuit Pack
UDS1-BD
MINOR
test board PCSSpp l
UDS1 Interface Circuit Pack
UDS1-BD
WARNING
test board PCSSpp sh
UDS1 Interface Circuit Pack