Справочник Пользователя для Lucent Technologies R5SI

Скачать
Страница из 2643
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si  
555-230-123  
Issue 1
April 1997
Maintenance Architecture 
Page 1-7
Protocols 
1
The maximum user rate is 64 kbps for voice and data. The maximum 
distances are based on T1 limitations. At 2.048 Mbps, each E1 frame 
consists of 32 64-kbps channels
Analog
 
 A modulated voice-frequency carrier signal
ADU Proprietary
 
 A signal generated by an ADU. The signal is for 
communication over limited distances and can be understood only by a 
destination ADU or destination system port with a built-in ADU
Digital Signal Level 1 (DS1) 
 A protocol defining the line coding, 
signaling, and framing used on a 24-channel line. Many types of trunk 
protocols (for example, PRI and 24th-channel signaling) use DS1 protocol 
at layer 1
European Conference of Postal and Telecommunications rate 1 (CEPT1) 
 A protocol defining the line coding, signaling, and framing used on a 
32-channel line. Countries outside the United States use CEPT1 protocol
Inside the system, data transmission appears in one of two forms: 
1. Raw digital data, where the physical layer protocols, like DCP, are 
stripped at the incoming port and reinserted at the outgoing port.
2. Pulse Code Modulation (PCM)-encoded analog signals (analog 
transmission by a modem), the signal having been digitized by an 
analog-to-digital coder/decoder (CODEC) at the incoming port.
Layer-2 Protocols
Layer-2 protocols are given below:
8-bit character code 
 
Between the DTE equipment and the DCE 
equipment. Depending on the type of equipment used, the code can be 
any proprietary code set. 
Digital multiplexed interface
 proprietary 
 Family of protocols between 
the originating DCE and the destination DCE for digital transmission. See 
DEFINITY Communications System and System 75 and System 85 
DS1/DMI/ISDN PRI Reference
, 555-025-101; and 
Digital Multiplexed 
Interface [DMI] Technical Specification,
 555-025-204
Voice-grade data
 
 Between the originating DCE and the destination 
DCE for analog transmission