Справочник Пользователя для Lucent Technologies R5SI

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si

555-230-123

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids

Page 8-171

get vector

Examples

get vector
get vector print
get vector long
get vector long print

Description

The get vector command displays the vector and the Switch Processing Element
(SPE) used for a core dump of memory to tape or memory card. The dump
occurs on the tape or disk of the previously active SPE (or the SPE previously
specified using the "set vector" command in systems with duplicated SPEs).

The vector is cleared when a system restart of the proper level is performed
regardless of whether the core is actually dumped.

Defaults

No defaults.

Parameters

Help Messages

If the system technician presses help after entering "get vector" the following
message will be displayed:

[’long’], [’print’]

Error Messages

If a list configuration command is still executing while the "get vector" command
is entered, the following message will be displayed:

Still clearing previously canceled command; please try later

If during the execution of a command a resource problem occurs that requires
the user to restart the command, the following message is displayed:

Command resources busy; Press CANCEL to clear, and then resubmit

long

This causes timestamps for the core dump to be printed. If SPEs are duplicated,
timestamps are printed for both SPEs (or a message stating why the timestamp
cannot be printed is displayed).

This causes the report to be printed if a printer is linked to the SAT.