Справочник Пользователя для Lucent Technologies R5SI
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-255
monitor system
8
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
following message will be displayed:
All maintenance resources busy; try again later
Output
The following output fields are for the "monitor system view1" and "monitor system
view2" commands.
view2" commands.
Console #
A list of console numbers that are either activated or deactivated.
Activated:
The attendant console is in service. An attendant console is
considered activated if its handset/headset is plugged in, it is not
busied out, and the system is in day service and the console is a day
or day/night or principle console, or the system is in night service and
the console is a night or day/night console.
considered activated if its handset/headset is plugged in, it is not
busied out, and the system is in day service and the console is a day
or day/night or principle console, or the system is in night service and
the console is a night or day/night console.
Deactivated:
The attendant console is not in service. The attendant console is
considered deactivated if it does not meet the previous activated
conditions.
considered deactivated if it does not meet the previous activated
conditions.
# of alarms for
trunks
trunks
The total number of existing minor and major alarms on trunk ports.
# of alarms for
other
resources
other
resources
The total number of existing minor and major alarms on all
maintainable objects in the system except trunks and stations.
maintainable objects in the system except trunks and stations.
First OSS
number has
been
informed?
number has
been
informed?
Have all the alarms been reported and acknowledged by the first OSS
telephone number. If the "Alarm Origination" is not enable or there are
no active alarm, the field will be "n".
telephone number. If the "Alarm Origination" is not enable or there are
no active alarm, the field will be "n".
Measurement
Hour
Hour
The starting time of the period for which the measurement was taken.
For example, if the measurement hour is shown as 1800, it means the
traffic status data displayed is for the time period from 6 PM to 7 PM
(The measurement is taken on an hourly basis).
For example, if the measurement hour is shown as 1800, it means the
traffic status data displayed is for the time period from 6 PM to 7 PM
(The measurement is taken on an hourly basis).
Grp no
A number between 1 and the maximum trunk group number or
maximum hunt group number in the system.
maximum hunt group number in the system.
Grp dir
Group direction: incoming, outgoing or two way.
Calls qued
Total calls that arrived and were placed in the queue for trunk groups.
Calls aban
Total calls that were abandoned by the caller.