Справочник Пользователя для Lucent Technologies R5SI

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-278

release cdr-link 

If the cdr-link is not administered, then the following message will be displayed:

 Link not administered

If the command entered is in conflict with another currently executing command, 
then a message will be displayed showing the login id of the conflicting user and 
the conflicting command. The message is as follows:

 ’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message will be displayed:

 Command resources busy; Press CANCEL to clear, and then 

resubmit

If all of the available maintenance resources are currently in use, then the 
following message will be displayed:

 All maintenance resources busy; try again later

For the following output example, assume that the command that was entered is 
"release cdr-link primary."

Port

Not applicable. Will always be blank.

Maintenance Name

The type of maintenance object that is being released. If releasing 
the primary cdr-link the maintenance object will be PRI-CDR, else 
if releasing the secondary cdr-link the maintenance object will be 
SEC-CDR.

Alt. Name

Not applicable. Will always be blank.

Result

The result of the release - "PASS," "ABORT," "FAIL."

Error Code

A system-generated number that tells why the release failed or 
aborted. A detailed list of the codes can be found in the 
"Busyout/Release Commands" section of this chapter.

 
 release cdr-link primary

                      COMMAND RESULTS

  Port  Maintenance Name  Alt. Name  Result   Error Code
           PRI-CDR                    PASS

 Command successfully completed