Справочник Пользователя для Lucent Technologies R5SI
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-286
release mis
8
release mis
This command will release a specified management information system.
Synopsis
release mis
Permissions
The following default logins may execute this command: system technician,
inads, init, cust, rcust.
inads, init, cust, rcust.
Examples
release mis
Description
The release mis command will put a management information system into
service. Some tests are executed on the hardware to verify that the equipment is
functioning.
service. Some tests are executed on the hardware to verify that the equipment is
functioning.
Defaults
None.
Parameters
None.
Help Messages
If the system technician presses
HELP
after entering "release mis" the following
message will be displayed:
Entry is not required
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict