Справочник Пользователя для Lucent Technologies R5SI

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-462

status interface 

If the specified carrier/position processor interface circuit pack is not inserted, 
but the specified carrier is active, the following error message will be displayed:

Processor Interface (TN765) not 

started or is being started

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message will be displayed:

Command resources busy;

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message will be displayed:

All maintenance resources busy; try again later

Base Level Occupancy (Low)

Base Level Occupancy (High)

Primary Queue Audit Error

Secondary Queue Audit Error

Translation Audit Error

Protocol Timer Audit Error

Hardware Sanity Timeout

Hardware Resource Error

Hardware Overload Error

The following is an example of the fields contained on the output form.

 
 status interface a1

                  PROCESSOR INTERFACE STATUS

        Base Level Occupancy(low): 10
       Base Level Occupancy(high): 25
        Primary Queue Audit Error: 4
      Secondary Queue Audit Error: 10
          Translation Audit Error: 12
       Protocol Timer Audit Error: 0
          Hardware Sanity Timeout: 1
          Hardware Resource Error: 12
          Hardware Overload Error: 8