Справочник Пользователя для Lucent Technologies R5SI

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-525

status trunk 

If the trunk identifier is not in the valid range, the following error message is 
displayed:

Trunk or trunk group invalid

If the trunk group is not administered or has no members, the following message 
is displayed:

Group not assigned, or group assigned 

but with no member

If the trunk group member is not administered, the following message is 
displayed:

Group member not assigned

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message is displayed:

Command resources busy; 

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message is displayed:

All maintenance resources busy; try again later

The following is output when a user enters a trunk group and member:

Trunk Group/Member

The trunk group number and group member number. Valid 
identifiers are 1-99/1-99.

Port

The port location (cabinet-carrier-slot-circuit) of the trunk.

Signaling Group ID

If the trunk is of type ISDN, then this field contains the number of 
the ISDN Signaling Group to which this group belongs. 
Otherwise, this field is blank.

Connected Ports

Port locations (cabinet-carrier-slot-circuit) connected to the 
trunk.