Справочник Пользователя для Lucent Technologies R5SI
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-550
test board
8
test board
This command will perform a set of hardware diagnostic tests on the specified
circuit pack. The tests will vary according to the type of pack and short or long
request.
circuit pack. The tests will vary according to the type of pack and short or long
request.
Synopsis
test board location
[ short | long ][ repeat number | clear ] schedule
Permissions
The following default logins may execute this command: system technician,
inads, init, nms.
inads, init, nms.
Examples
test board 01c11 l
test board 01c11 l schedule
test board 02e15 sh r 2
test board 01c08
test board 02d12 r 4
test board 02d12 c
test board 01c11 l schedule
test board 02e15 sh r 2
test board 01c08
test board 02d12 r 4
test board 02d12 c
Description
The test board command will validate that the board exists at the specified
location. Based on the logical type (e.g., Analog, Digital, Hybrid, etc.) of board a
series of tests will be executed. Each individual test will exercise diagnostics on
the board and then return results of the test along with any possible error codes.
location. Based on the logical type (e.g., Analog, Digital, Hybrid, etc.) of board a
series of tests will be executed. Each individual test will exercise diagnostics on
the board and then return results of the test along with any possible error codes.
Some of the tests can be disabled by administering forms on the administration
terminal.
terminal.
Defaults
The default for the command is short with the repeat of 1.