Справочник Пользователя для Lucent Technologies R5SI
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-629
test packet-control
8
Permissions
The following default logins may execute this command: system technician,
inads, init, nms
inads, init, nms
Examples
test packet-control
test packet-control A
test packet-control B
test packet-control 1A
test packet-control 1B
test packet-control a short
test packet-control a s repeat 5
test packet-control b s r 5
test packet-control b long clear
test packet-control b l r 25
test packet-control A
test packet-control B
test packet-control 1A
test packet-control 1B
test packet-control a short
test packet-control a s repeat 5
test packet-control b s r 5
test packet-control b long clear
test packet-control b l r 25
Description
The test packet-control command performs hardware diagnostic tests on a
technician specified packet-control circuit pack.
technician specified packet-control circuit pack.
Defaults
For simplex systems, the location is optional and defaults to cabinet 1, carrier A.
For duplex systems, the cabinet default is again cabinet 1, but there is no default
for the carrier.
For duplex systems, the cabinet default is again cabinet 1, but there is no default
for the carrier.