Справочник Пользователя для Lucent Technologies R5SI
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-45
ANL-16-L (16-Port Neon Analog Line)
10
ANL-16-L (16-Port Neon Analog Line)
The following are 16-Port Analog Line circuit packs:
These circuit packs provide 16 ports for analog voice terminals. The TN746,
TN468, and TN749 support only single-line, on-premises/in-building, analog
voice terminals, and not off-premises stations, since these circuit packs are not
equipped with lightning protection. The TN746B, TN2144, TN2149, and TN468B
support both on-premises and off-premises (that is, out-of-building) analog voice
terminals. The TN468, TN468B, TN479, TN2135, TN2144, and TN2149 do NOT
support the neon message waiting feature.
TN468, and TN749 support only single-line, on-premises/in-building, analog
voice terminals, and not off-premises stations, since these circuit packs are not
equipped with lightning protection. The TN746B, TN2144, TN2149, and TN468B
support both on-premises and off-premises (that is, out-of-building) analog voice
terminals. The TN468, TN468B, TN479, TN2135, TN2144, and TN2149 do NOT
support the neon message waiting feature.
Test #48 may cause some terminal equipment to ring briefly during daily
maintenance. If this ringing is disturbing the customer or the terminal equipment,
it should be disabled via the
maintenance. If this ringing is disturbing the customer or the terminal equipment,
it should be disabled via the
change station <extension>
command. However,
on some releases of the software, this action disables Tests #6, #7, #161, and
#35 as well as Test #48.
#35 as well as Test #48.
No maintenance of the terminal connected to the 16-Port Neon Analog Line
circuit pack is performed, except to determine whether or not the terminal is
connected. Failures of the neon message waiting lamp power and the common
ringing application circuitry are reported as part of the Common Port Circuit Pack
errors (see errors 1281 and 1793 in the XXX-BD (Common Port Circuit Pack)
Maintenance documentation).
circuit pack is performed, except to determine whether or not the terminal is
connected. Failures of the neon message waiting lamp power and the common
ringing application circuitry are reported as part of the Common Port Circuit Pack
errors (see errors 1281 and 1793 in the XXX-BD (Common Port Circuit Pack)
Maintenance documentation).
1.
Where P is the port network number (1 for PPN and 2 or 3 for EPN); C is the carrier designation
(for example, A, B, C, D, or E); SS is the address of the slot in the carrier where the circuit pack
is located (for example, 01, 02, ..., etc.); and pp is the 2-digit port number (for example, 01).
(for example, A, B, C, D, or E); SS is the address of the slot in the carrier where the circuit pack
is located (for example, 01, 02, ..., etc.); and pp is the 2-digit port number (for example, 01).
MO Name (in
Alarm Log)
Alarm
Level
Initial Command to Run
1
Full Name of MO
ANL-16-L
MIN
test port PCSSpp l
16-Port Neon Analog Line
ANL-16-L
WRN
test port PCSSpp sh release
station <ext>
station <ext>
16-Port Neon Analog Line
TN746
TN746B
TN468 [G3iV2-386]
TN749 [G3iV2-386]
TN468B [G3iV2-386]
TN2135 [G3iV2-386]
TN2144 [G3iV2-386]
TN2149 [G3iV2-386]