Справочник Пользователя для Renesas R8C/2D

30.  The “Emulator Setting” dialog will be shown. 

Select the correct MCU group (R8C/2D) and device type (e.g. R5

D007334_11_S01_V02 

F212D8 for RSKR8C2D). 

31. 

 Flash and Connect”. 

RSK board, set the “Power 

33. Click <Next>. 

4. Set the firmware location to “User Flash Area”. Clear the 

35. 

6.  Set the “Communications baud rate” to “500000”. 

lick <Finish>. 

ote: The first time the E8a is connected, you may be asked to choose a driver, select “Renesas Communications”, 

7.  Accept any dialog warning that an older version of E8a firmware is necessary to work with the application. Allow 

 

The connection to the RSK will be completed and will activate the debugger buttons on the HEW toolbar. 

 

8. Right click on the download module listed in the left 

e microcontroller. 

 

39.  Click the <Reset GO> button.     

will only appear the FIRST time you connect to the target 
within a project. On subsequent connections the 
“Emulator setting” dialog will appear, please choose the 
same options to connect. 
 

Select “Erase

32.  If the E8a is to provide power to the 

Target from Emulator” checkbox, and choose the “5.0V” option. 
Otherwise connect a 5V centre positive supply. 
 

 
3

“Enable advanced setting” checkbox. 
Click <Next> 

 
3
 
C
 
N
after a few seconds the “Interface” and “Channel” numbers will be automatically displayed, click <Close> on the 
dialog. 
 
3

download of firmware to complete, this may take several seconds. 

3

hand pane and select “Download”. 

The code will be downloaded to th
This may take several seconds. 
 
 

 

The code will run and you will see the LEDs flash on the board. 

40.  Click the <Stop> button.     

 

The code will stop and the source code will be opened at the current program counter. 

 

leted this quick start procedure, please review the tutorial code and sample code that came with 

 for 

After you have comp
the kit. You can add projects to the current workspace by selecting (Project > Insert Project) from the main menu. 
The tutorials will help you understand the device and development process using Renesas Development Tools. 
The Hardware manual supplied with this Renesas Starter Kit is current at the time of publication. Please check
any updates to the device manual from the Renesas website at: