Справочник Пользователя для Hitachi 32LD8800TA

FUNCTION (continued)

Audio Switching

NICAM / Sound Multiplex(including A2) (TV mode)

You can make optimum use of available audio by pressing

bottom of remote control. Audio can be switched only

if receiving NICAM and sound multiplex signals; otherwise, pressing this button will have no effect, such as when
only mono sound is received.
These can be divided into two main categories: Bilingual/Dual Sound broadcast and Stereo broadcast.

Bilingual/Dual Sound broadcast

Bilingual broadcast is the broadcast available on the main and sub languages, while dual sound broadcast is
available on the primary and secondary sounds; for example, some sports programs contain broadcast commentary
on a game as primary sound, and a commentary about a team as the secondary.
When bilingual program is received, sound mode display appears in yellow as shown. Also, when receiving NICAM
signals, NICAM display will appear.

Each time

button is pressed, the display is switched in the sequence of following.

Sound multiplex signal received

[ ]

Yellow

NICAM signal received

[ ]

Yellow

Green

Yellow

Green

NICAM[ ]

Yellow

[

I]…Main language/Primary Sound

[

II]...Sub language/Secondary Sound

▼…force mono: This selects main language or primary sound.

Stereo broadcast

With stereo broadcast, you can enjoy different sound from either side.
When a stereo program is received, sound mode display will appear in red as shown.
Also, when receiving NICAM signals, NICAM display will appear.

Press

button to switch between stereo and mono sound.

Sound multiplex signal received

NICAM signal received

Red

Green

Red

Green

NICAM

...Stereo

.....Force Mono

NOTE

Please select ▼(force mono) in case of poor reception, noise, poor stereo sound due to signal condition so that

you can receive a clear mono sound.

▽

represents the Mono broadcast.

LD8800TA-8ｔｈ-P51-P60.indd 51

2005/11/14 13:27:28