Справочник Пользователя для Fujitsu C122-E177-01EN
UEFI Menu Operations
TPM Activate Status
⇒Activated
When ‘Disabled’ is selected
TPM Enabled Status
TPM Enabled Status
⇒ Disabled
TPM Activate Status
⇒Deactivated
Pending TPM operation
Performs settings on other TPM chip.
None
Enable Take Ownership
Disable Take Ownership
TPM Clear
Default setting is None.
Remarks
“Pending TPM operation” is displayed when “Enabled” is selected in “TPM
Support”.
“TPM Enabled Status” of “Current TPM operation” is “Enabled” and selection
is possible if “TPM Active Status” is “Activated”.
In other situations, gray out is displayed and selection is not possible.
None
Enable Take Ownership
Disable Take Ownership
TPM Clear
Default setting is None.
Remarks
“Pending TPM operation” is displayed when “Enabled” is selected in “TPM
Support”.
“TPM Enabled Status” of “Current TPM operation” is “Enabled” and selection
is possible if “TPM Active Status” is “Activated”.
In other situations, gray out is displayed and selection is not possible.
Current Status Information
Current status of TPM chip is displayed. When TPM Support is set to
Disabled, “SUPPORT TURNED OFF” is displayed.
Warning
Following is the TPM Chip status displayed as TPM Enabled Status, TPM
Activate Status, and TPM Owner Status. No item is set.
However, as the TPM Chip status cannot be read immediately after changing
the settings of [TPM SUPPORT] from [Disabled] to [Enabled],the default
value is set to [Disabled],[Deactivated],[Unowned]
Disabled, “SUPPORT TURNED OFF” is displayed.
Warning
Following is the TPM Chip status displayed as TPM Enabled Status, TPM
Activate Status, and TPM Owner Status. No item is set.
However, as the TPM Chip status cannot be read immediately after changing
the settings of [TPM SUPPORT] from [Disabled] to [Enabled],the default
value is set to [Disabled],[Deactivated],[Unowned]
TPM Enabled Status
Values which can be set as [TPM State] are displayed as follows.
[Enabled]: When [Enabled] is set as [TPM State]
[Disabled]: When [Disabled] is set as [TPM State]
[Enabled]: When [Enabled] is set as [TPM State]
[Disabled]: When [Disabled] is set as [TPM State]
TPM Active Status
Values which can be set in [TPM State] are displayed as follows.
[Activated]: When [Enabled] is selected as [TPM State]
[Deactivated]: When [Disabled] is selected as [TPM State]
[Activated]: When [Enabled] is selected as [TPM State]
[Deactivated]: When [Disabled] is selected as [TPM State]
TPM Owner Status
Shows whether the TPM chip is authorized
[Owned]
[Unowned]
[Owned]
[Unowned]
Commit Changes and Exit
Exit from this menu after saving the changes in the settings.
Discard Changes and Exit
Exit from this menu after cancelling the changes in the settings.
TABLE 3.44 Display contents of operation help display
Items
Description
=Move Highlight
Moves the cursor up and down.
<Enter>=Select Entry
Selects the items.
Esc=Exit
Returns to “
” without saving the setting
changes of this menu.