Справочник Пользователя для ASUS P9X79 WS

ASUS P9X79 WS

3-47

This item allows you to configure RAID setup through SATA ports. 

Main

Ai  Tweaker

Advanced

Monitor

Boot

Tool

Exit

Drive Xpert Mode

Back 

Tool\  

ASUS Drive Xpert  >

UEFI BIOS Utility - Advanced Mode

Drive Xpert Setup Utility

Drive Xpert Mode 

 

   Normal Mode

Drive Xpert Device(s) List :

 >   SATA6G_E1 (Navy Blue) 

 

 

 

>   SATA6G_E2 (Navy Blue)

This item allows you to choose the Drive Xpert modes.
[Normal Mode]  Allows you to use the SATA6G_E1 and SATA6G_E2 connectors as normal 

SATA connectors.

[Super Speed]  Allows you to use the Super Speed function that combines two hard drives 

as on single drive partition.

[EZ Backup] 

Allows you to use the EZ Backup function that copies and maintains an 

identical image of data from the SATA6G_E1 drive to the SATA6G_E2 

drive.

[Normal Mode] 

When using only one hard disk in Normal Mode, connect the hard disk to the 

SATA6G_E1 connector on the motherboard.

[Super Speed] [EZ Backup] 

Please plug two EMPTY hard drives to the SATA6G_E1 and SATA6G_E2 connectors 

before using this function, or else all data stored in the two hard drives will be 

destroyed! 

Mode change might damage the operating system if the operating system is already 

installed on one of the hard drives.

SATA6G _E1/ E2 (Navy Blue) 

While entering setup, BIOS auto detects the presence of SATA devices. Press    

 

<Enter> to display the information of the hard disks which are connected to the    

 

SATA6G_E1 and SATA6G_E2 connectors on the motherboard.

• 

Before using the Drive Xpert function, please make sure that you have connected 

the SATA signal cables and installed SATA hard disk drives to the SATA6G_E1 and 

SATA6G_E2 connectors.

• 

You can only make one Drive Xpert change at a time before you save BIOS settings and 

restart the computer.