Справочник Пользователя для ASUS M2N-L
-
Chapter : Software support
3. Use the up or down arrow keys to select a the RAID set you want to rebuild,
then press <F7>. A confirmation message appears.
4. Press <ENTER> to start rebuilding
the array, or <ESC> to cancel.
Rebuild array?
[ENTER] OK [ESC] Cancel
[↑↓] Select [F6] Back [F7] Finish
Array 1 : NVIDIA MIRROR XXX.XXG
- Select Disk Inside Array -
RAID Mode: Mirrored
Stripe Width: 1 Stripe Block: 64K
Port Index Disk Model
Capacity
0.0 1 XXXXXXXXXXXXXXXXX
XXX.XXGB
1.1 0 XXXXXXXXXXXXXXXXX
XXX.XXGB
5. When you press <ENTER>, a confirmation message appears. Press <Y> to
overwrite all data on new (or added) disks, or <N> to cancel. The array List
screen displays the RAID set after rebuilding.
All data on new (or added) disks will be overwritten. Continue?
[Y] YES [N] NO