Справочник Пользователя для ASUS M2N-L

ASUS M2N-L

-

1.  After making all the connections, replace the system case cover. 
2.  Be sure that all switches are off.
3.  Connect the power cord to the power connector at the back of the system 

chassis.

4.  Connect the power cord to a power outlet that is equipped with a surge 

protector.

5.  Turn on the devices in the following order:
 

a.  Monitor

 

b.  External SCSI devices (starting with the last device on the chain)

 

c.  System power

6.  After applying power, the system power LED on the system front panel case 

lights up. For systems with ATX power supplies, the system LED lights up 

when you press the ATX power button. If your monitor complies with “green” 

standards or if it has a “power standby” feature, the monitor LED may light up 

or switch between orange and green after the system LED turns on.

 

The system then runs the power-on self tests or POST. While the tests are 

running, the BIOS beeps or additional messages appear on the screen. 

If you do not see anything within 30 seconds from the time you turned on 

the power, the system may have failed a power-on test. Check the jumper 

settings and connections or call your retailer for assistance.

7.  At power on, hold down the <Del> key to enter the BIOS Setup. Follow the 

instructions in Chapter 4.