Справочник Пользователя для ASUS AT3N7A-I

ASUS AT3N7A-I

2-5

Allows you to set the system time.

Allows you to set the system date.

While entering Setup, the BIOS automatically detects the presence of SATA devices. There 

is a separate sub-menu for each SATA device. Select a device item then press <Enter> to 

display the SATA device information.

The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size, 

LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART Monitoring). These 

values are not user-configurable. These items show Not Detected if no Serial ATA device is 

installed in the system.

Selects the type of SATA drive. Setting to Auto allows automatic selection of the appropriate 

SATA device type. Select CDROM if you are specifically configuring a CD-ROM drive. Select 

ARMD (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive. 

Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device 

supports this mode, and if the device was not previously formatted with LBA mode disabled. 

Configuration options: [Disabled] [Auto]

Enables or disables data multi-sectors transfers. When set to [Auto], the data transfer from 

and to the device occurs multiple sectors at a time if the device supports multi-sector transfer 

feature. When set to [Disabled], the data transfer from and to the device occurs one sector 

at a time. Configuration options: [Disabled] [Auto]

Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]

Selects the DMA mode. Configuration options: [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology. 

Configuration options: [Auto] [Disabled] [Enabled]

Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled]