Справочник Пользователя для ASUS Z7S WS

5-26

Chapter 5: Software support

Creating.a.RAID.0.set.(striped)

To create a RAID 0 set:

1. From the utility main menu, select 1. Create RAID Volume, then press

<Enter>. This screen appears.

2. Enter a name for the RAID 0 set, then press <Enter>.
3. When the RAID Level item is highlighted, press the up/down arrow key to

select RAID 0(Stripe), then press <Enter>.

4. When the Disks item is highlighted, press <Enter> to select the hard disk

drives to configure as RAID. This pop-up screen appears.

Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5

[

CREATE ARRAY MENU

]

[

DISK/VOLUME INFORMATION

]

Enter a string between 1 and 16 characters in length that can be used

to uniquely identify the RAID volume. This name is case sensitive and

cannot contain special characters.

[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [Enter]-Select

Name:

RAID Level:

Disks:

Strip Size:

Capacity:

Volume0

RAID0(Stripe)
Select Disks
128KB
0.0 GB

Create Volume

[

SELECT DISKS

]

[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete

Port Drive Model Serial # Size Status

0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

1 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
2 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk
3 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID Disk

Select 2 to 4 disks to use in creating the volume.

5. Use the up/down arrow key to highlight a drive, then press <Space> to

select. A small triangle marks the selected drive. Press <Enter> after

completing your selection.