Справочник Пользователя для Advantech PCI-6872

PCI-6872 User’s Manual

USB connector. The adapter cable has a 5 x 2-pin connector on one end
and a USB connector on the other.
The USB interfaces can be disabled in the system BIOS setup.

2.17 Ethernet configuration

The PCI-6872 is equipped with a high performance 32-bit PCI-bus Ether-
net interface which is fully compliant with IEEE 802.3U 10/100Mbps
CSMA/CD standards. It is supported by all major network operating sys-
tems.
The PCI-6872 supports 10/100Mbps Ethernet connections with onboard
RJ-45 connectors(CN8)

2.17.1 100Base-T connector (CN8)

10/100Base-T connects to the PCI-6872 via an adapter cable to an 8-pin
polarized header (CN8).

2.17.2 Network boot

The Network Boot feature can be utilized by incorporating the Boot
ROM image files for the appropriate network operating system. The Boot
ROM BIOS files are included in the system BIOS, which is on the utility
CD disc.

2.18 Power connectors (CN14, CN15)

2.18.1 Main power connector, +5 V, +12 V (CN15)

Supplies main power to the PCI-6872 (+5 V), and to devices that require
+12 V.

2.18.2 CPU Fan power supply connector (CN14)

Provides power supply to CPU cooling fan. Only present when +12 V
power is supplied to the board.

2.19 ATX Power & HDD LED, speaker out Connector
(CN16, CN17, CN19)

Next, you may want to install external switches to monitor and control the
PCI-6872. These features are optional: install them only if you need
them. CN16, CN17, CN19 integrated in one connector, which is an 5x3