Справочник Пользователя для AMD NX800LX

 

 
 

 
In the future, you may need to install expansion cards. The following sub‑sections describe 
the slots and the expansion cards that they support. 
 

 

Make sure to unplug the power cord before adding or removing 
expansion cards. Failure to do so may cause you physical injury and 
damage motherboard components. 

 

 

1.  Before installing the expansion card, read the documentation that came with it and 

make the necessary hardware settings for the card. 

2.  Remove the system unit cover (if your motherboard is already installed in a chassis). 
3.  Remove the bracket opposite the slot that you intend to use. Keep the screw for later 

use. 

4.  Align the card connector with the slot and press firmly until the card is completely 

seated on the slot. 

5.  Secure the card to the chassis with the screw you removed earlier. 
6.  Replace the system cover. 

After installing the expansion card, configure it by adjusting the software settings. 
1.  Turn on the system and change the necessary BIOS settings. 
2.  Assign an IRQ to the card if needed. 
3.  Install the software drivers for the expansion card.