Справочник Пользователя для AMD GA-MA69VM-S2
GA-MA69VM-S2 Motherboard
- 32 -
English
2-1
Standard CMOS Features
Date
The date format is <week>, <month>, <day>, <year>.
Week
The week, from Sun to Sat, determined by the BIOS and is display only
Month
The month, Jan. Through Dec.
Day
The day, from 1 to 31 (or the maximum allowed in the month)
Year
The year, from 2000 through 2099
Time
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-
time clock. For example, 1 p.m. is 13:00:00.
time clock. For example, 1 p.m. is 13:00:00.
IDE Channel 0 Master, Slave
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
IDE Device Setup. You can use one of three methods:
• Auto
Allows BIOS to automatically detect IDE/SATA devices during POST.(default)
• None
Select this if no IDE/SATA devices are used and the system will skip the
automatic detection step and allow for faster system start up.
automatic detection step and allow for faster system start up.
• Manual
User can manually input the correct settings.
Access Mode Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto(default:Auto)
IDE Channel 2/3 Master, Slave
IDE Auto-Detection Press "Enter" to select this option for automatic device detection.
Extended IDE Drive IDE/SATA devices setup. You can use one of two methods:
• Auto
Allows BIOS to automatically detect SATA IDE devices during POST. (Default
value)
value)
• None
Select this if no SATA IDE devices are used and the system will skip the
automatic detection step and allow for faster system start up.
automatic detection step and allow for faster system start up.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Standard CMOS Features
Date (mm:dd:yy)
Wed
, Feb 14 2007
Time (hh:mm:ss)
14:42:37
` IDE Channel 0 Master
[None]
` IDE Channel 0 Slave
[None]
` IDE Channel 2 Master
[None]
` IDE Channel 2 Slave
[None]
` IDE Channel 3 Master
[None]
` IDE Channel 3 Slave
[None]
Drive A
[1.44M, 3.5"]
Floppy 3 Mode Support
[Disabled]
Halt On
[All Errors]
Base Memory
640K
Extended Memory
511M
Item Help
Menu Level`
Menu Level`
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults