Справочник Пользователя для Oregon Scientific RMR802A

E

N

3

1.  RESET: Reset unit to default settings
2.   EU / UK: Select the nearest radio signal (RMR802  

only)

3.  °C / °F: Select temperature unit

1

       

2

3

4

5

1.  LED status indicator
2.  Wall mount hole
3.  Battery compartment 
4.  RESET hole 
5.  CHANNEL switch

The solar panel is an energy saving feature, which is an 
environmentally friendly way to provide additional power 
to  the  main  unit  and  prolongs  battery  life.  However,  it 
cannot replace battery power entirely. 

1.  Remove the battery compartment.
2.  Insert the batteries, matching the polarities. 
3.  Press RESET after each battery change.

Clock / alarm

Main unit batteries low

Outdoor temperature

Sensor batteries low

       

The main unit can collect data from up to 3 sensors.
To set up the sensor:
1.  Open the battery compartment.
2.   Insert the battery, matching the polarities.
3.  Select a channel then press RESET. 
4.  Close the battery door.
5.  Place the sensor within 30 m (98 ft) of the main unit 

using the table stand or wall mount.

 TIP  Ideal placements for the sensor would be in any 
location on the exterior of the home at a height of not 
more than 1.5 m (5 ft) and which can shield it from direct 
sunlight or wet conditions for an accurate reading.