Листовка для Oregon Scientific RM836A

Thank you for selecting an Oregon Scientifi c

TM

travel 

clock (RM836A). 
Keep this manual handy as you use your new product. 
It contains practical step-by-step instructions, as well as 
technical specifi cations and warnings you should know.

1.  SNOOZE / LIGHT: Press to snooze the alarm for 8  
 

mins and / or illuminate the backlight for 5 secs

2.  MODE: Press to toggle between the clock with U.S.  
 

time zone and day of week, or clock with seconds;  

 

press and hold to set the clock

3. 

 : Press to increase a value, or press and hold to  

 

turn the atomic clock on.   : Press to decrease a  

 

value

4.  ALARM: Press to toggle between calendar and  
 

alarm display; press to turn the alarm on / off when  

 

you are in the alarm display 

1.  ZONE: Press to select a U.S. time zone; press and  
 

hold to turn the atomic clock off 

2.  LOCK: Slide to lock or unlock the keypad 
3.  Battery compartment
4.  RESET: Press to reset the unit

2

1

4

3

1

2

3

8

9

4 5 6

7

1.  Shows atomic clock reception status 
2.  12-hour clock 
3.  Shows when batteries are low
4.  Time zones: (P) Pacifi c, (M) Mountain, (C) Central,  
 

(E) Eastern

5.  Shows when alarm is activated
6.  Shows when alarm time is displayed
7.  Calendar / alarm display area 
8.  Clock and time zone display area
9.  Temperature in °F

Insert the batteries making sure the polarities (+ / -) 
match.

This  product  has  two  displays:  Clock  with  time  zone 
and  day  of  week  in  English,  French  or  Spanish,  and 
clock  with  seconds.  Press  MODE  to  toggle  between 
the two displays.
The  time  is  automatically  updated  by  the  U.S. Atomic 
Clock  in  Boulder,  Colorado  unless  you  disable  this 
feature. Signals are collected by the main unit when it is 
within 932 miles (1500 km) of a signal.
Initial reception takes 2 - 10 minutes, and is initiated when 
you fi rst setup the unit, and whenever you press RESET. 
If the signal is weak, it can take up to 24 hours to get a 
valid atomic clock signal reception. Once complete, the 
reception  icon  will  stop  blinking. The  icon  is  shown  in 
the Clock Area.

 

 

To force a 

T

T

manual search for atomic clock signals, press 

and hold   for 2 seconds. If no signal is found, check 
the batteries.

NOTE   If the atomic clock signal is received and the 

   If the atomic clock signal is received and the 

hour is incorrect, use the ZONE button to adjust to the 
correct time zone - P (Pacifi c), M (Mountain), C (Central) 
or E (Eastern).

You only need to do this if you have disabled the atomic 
clock reception, or if you are too far from the atomic clock 
signal. To disable the atomic clock reception, press and 
hold ZONE.
1.  Press and hold MODE for 2 seconds.
2.  Select the hour, minutes, year, month, date, and  
 

display language. Press   or   to change the 

 

setting. Press MODE to confi rm.

    NOTE  The   language   options   are (E) English,  

  The   language   options   are (E) English,  

 

(F) French, and (S) Spanish. 

1.   Press and hold ALARM for 2 seconds.

2.  Select the hour and minutes.
 

Press   or   to change the setting. Press    
ALARM to confi rm.

NOTE   The Alarm is automatically activated whenever 

   The Alarm is automatically activated whenever 

you change  the alarm  time and 

 will  appear  on the 

display.

When activated, the alarm starts quietly, then gradually 

becomes louder. If no action is taken, the alarm will 

automatically snooze for 8 minutes, then sound once 

more before it turns off completely for the day.
To turn the alarm off, press ALARM. 
To snooze the alarm, press SNOOZE.

RESET

1

2

3

4

RESET

RM836A 086-004112-012.indd   1

8/22/05   3:09:57 PM