Справочник Пользователя для Oregon Scientific RMR612HGA

EN

7

For best results:

• Insert the batteries and select the channel and

temperature unit before you mount the sensor.

• Place the sensor out of direct sunlight and

moisture.

• Do not place the sensor more than 30 meters

(98 feet) from the main (indoor) unit.

• Position the sensor so that it faces the main

(indoor) unit, minimizing obstructions such as
doors, walls, and furniture.

• Place the sensor in a location with a clear view

to the sky, away from metallic or electronic
objects.

• Position the sensor close to the main unit

during cold winter months as below-freezing
temperatures may affect battery performance
and signal transmission.

You may need to experiment with various locations to
get the best results.

To  search for a sensor, press and hold MEM  and
CHANNEL for 2 seconds.

If the sensor is still not found, check the

batteries, obstructions, and remote unit location.

Signals from household devices such as

doorbells, electronic garage doors, and home security
systems may cause temporary reception failure. This is
normal and does not affect general product performance.
The reception will resume once the interference ends.

Data is sent from the sensor(s) every 40 seconds.
The reception icon shown in the Temperature and
Humidity Areas shows the status.

--- shows in Temp/
Humidity Areas

ICON

DESCRIPTION

Main unit is searching for
sensors.

At least 1 channel has
been found.
Channel 1 is selected (the
number will change
depending on the sensor
you select).

The selected sensor cannot
be found. Search for the
sensor or check batteries.

RMR612HGA lab test R2

1/17/04, 4:58 PM

7